Symphony MT6582 P6__5.0 1GB FLASH FILE CM2 READ 100% tested

Symphony MT6582 P6__5.0 1GB FLASH FILE CM2 READ 100% tested 

MT6582__Symphony__P6__P6__5.0__S3566_DS35661_SYMPHONY-P6_L121

• Chinese Miracle II  [MTK module] v 1.58
• 
  
• Scatter Load Ok , BaseBand : MT6582 , Project : s3566 , Storage : EMMC
• Files found : 13 , Set to Flash : 12
• Ready to Flash!
• 
  
• Operation : Flash [ v1.58 ]
• 
  
• ======= Flash
• 1. Power Off Phone , Remove battery , Insert back
• 2. Insert USB cable. In some cases require hold BootKey
• 
  
• Wait for phone...
• Phone found! [ 14 ]
• Sync...
• Inital Boot Ok!
• BB_CPU_PID : 6582
• BB_CPU_NME : [MediaTek] MT6582_S00
• BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
• Processing BROM stage
• Settings for BROM configured!
• SecCfgVal : 0x00000000
• BromVer   : 0x00FF
• BLVersion : 0x0001
• PreLoader : Active [ Boot with PL ]
• BootLdrSS : NORMAL with PRELOADER
• Processing DA stage
• DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
• Sending and initialize DA ...
• Running DA ver.4.2 on BBID : 0x87
• NAND Flash : NOT INSTALLED
• eMMC Flash : 150100513732534D4200DD00D03C5209
• Initialize Memory ...
• DRAM already initialized by Preloader
• DAgent sent , init HW now
• eMMC FlashIC initialized
• [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
• [eMMC] : FLASH_INF : [SAMSUNG] , BMS27
• [eMMC] : FLASH_CID : 150100513732534D4200DD00D03C5209
• [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
• [eMMC] : FLASH_LEN : 0x00000001D2000000
• [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
• DEV RID    : 0x3192FBD195A603965DF1001E18EA01E0
• INT RAM    : 0x00020000
• EXT RAM    : 0x40000000 [1 GiB]
• BOOT TYPE  : EMMC_FLASH_BOOT
• SOC VERIFY : C1
• Boot Ok! +p6325
• 
  
• ScatCFG : BaseBand : MT6582 , Project : s3566 , Storage : EMMC
• Setting : Flash Pre-Erase (Safe) : Enabled
• Setting : AFF verify :  Enabled
• Setting : HW verify :  Enabled
• 
  
• BL : Check HW compatibility
• BL : BBID supported by BootLoader!
• BL : Skip checking by User request!
• 
  
• BL : BatteryLevel : 4267 mV
• BL : BatteryLevel Ok
• 
  
• BL : Flash Pre-Erase
• Total blocks to Erase : 2
• Erase : 0x0000000000C00000-0x0000000000480000
• Erase : 0x0000000002C80000-0x00000001CE700000
• Flash Pre-Erase Done, time used : 00:00:04
• 
  
• SecCfg Passed , 1799
• BMT remark not need. Will skip
• 
  
• Preloader Download skipped by user request!
• PartCount : 0014
• Update PMT by user request
• Repartition Done!
• Use FLN Mode
• 
  
• Processing : Flash Write
• Flash now : MBR
• Image Flash Ok
• Flash now : EBR1
• Image Flash Ok
• Flash now : UBOOT
• Image Flash Ok
• Flash now : BOOTIMG
• Image Flash Ok
• Flash now : RECOVERY
• Image Flash Ok
• Flash now : SEC_RO
• Image Flash Ok
• Flash now : LOGO
• Image Flash Ok
• Flash now : EBR2
• Image Flash Ok
• Flash now : TEST
• Image Flash Ok
• Flash now : ANDROID
• Image Flash Ok
• Flash now : CACHE
• Image Flash Ok
• Flash now : USRDATA
• Image Flash Ok
• Flash Write Done, time used : 00:04:36
• 
  
• Processing : Verify
• Verify Passed : MBR
• Verify Passed : EBR1
• Verify Passed : UBOOT
• Verify Passed : BOOTIMG
• Verify Passed : RECOVERY
• Verify Passed : SEC_RO
• Verify Passed : LOGO
• Verify Passed : EBR2
• Verify Passed : TEST
• Verify Passed : ANDROID
• Verify Passed : CACHE
• Verify Passed : USRDATA
• Data Verify Done, time used : 00:01:09
• 
  
• Update Mirror PMT
• Update Done!
• 
  
• Update RomInfo done
• 
  
• Done!
• Elapsed: 00:06:25
• Reconnect Power/Cable!

1.